Asphalt Paving in Chandler, TX

Summit Asphalt paves driveways and parking lots for homeowners, landlords and business owners in Chandler. Chandler sits about 10 miles west of Tyler and is part of our service area.

Below is what we see around Chandler: the age of the homes, the soil under the pavement, and the driveway rules you should know before work starts.

Straight asphalt road lined with tall pine trees running through green countryside in sunlight

What is different about asphalt paving in Chandler?

Chandler is a small town, and the pavement here has its own pattern. Three things shape most of our jobs.

Older homes, older driveways

Half the homes in Chandler were built before 1999.Some driveays that have not been worked on since that time have endured decades of sun, rain and tire traffic. Cracking, soft edges and low spots are common, and some of those driveways need a full replacement instead of a patch.

Soil that moves a little

The soils around central Chandler, mainly Kirvin, Cuthbert and Larue, swell when wet and shrink as they dry. The movement is moderate, not extreme, but it still stresses pavement over time. We prepare and compact the base carefully and shape the surface so water runs off instead of soaking in at the edges.

Common asphalt jobs in Chandler

Most of our work here falls into a few categories:

  • New driveways and driveway replacements. See our page on driveway paving. If you are searching for driveway paving in Chandler, this is where most homeowners start.
  • Parking lots for shops, churches, offices and rental properties. Details are on our parking lot paving page.
  • Repairs and patching for potholes, cracked edges and failed spots. Read about asphalt repair.
  • Resurfacing when the base is still sound but the surface is worn out. See resurfacing and overlays.
  • Sealcoating and striping to protect and mark newer pavement. See sealcoating and parking lot striping.

Local rules to know before paving in Chandler

Driveway rules depend on where the driveway sits, so it pays to check before you pour or pave.

City driveway standards

Under Chandler's zoning ordinance, a private driveway to a home must be at least 12 feet wide, and an access driveway can be no wider than 36 feet. Every parking lot must connect to a street or alley by an access driveway.

The maximum slope for an access driveway is 10 percent, and transition slopes follow the standards set by the city's engineer. We plan grades around those limits.

Permits

The city handles permit applications, inspections and payments online through MGOConnect. You can find out specific permitting details for your jurisdiction there.

Driveways off a state highway

If your property touches a state highway, the driveway connection is regulated by TxDOT instead. Contact your local TxDOT district office for further information. You will need a completed Permit Form 1058 for a new or modified access driveway.

No work may be done in the right of way until the permit is fully executed and TxDOT has been given 24-hour notice. We can talk through the timing with you before scheduling.

How we work with Chandler homeowners

  1. We look at the site: the drainage, the existing pavement, and where the driveway meets the road.
  2. We explain what the job needs, whether that is a patch, an overlay or a full replacement, and what affects the cost.
  3. We prepare the base, lay and compact the asphalt, and clean up the work area.

Property managers and business owners get the same walk-through, with extra attention to parking layout and access.

Questions from Chandler

A few things people ask us.

Do I need a permit to pave my driveway in Chandler?

It depends on the project and the location. City permits go through MGOconnect, and driveways connecting to a state highway need TxDOT approval. Ask us when you request a quote and we will help you figure out which applies.

Does the weather affect when you can pave?

Yes. The Tyler area gets about 42 inches of rain a year, and asphalt needs a dry base to be laid properly. We schedule around wet stretches and plan drainage so rain moves off the finished surface.

How does summer heat affect new asphalt?

The area sees about 98 days a year at or above 90°F. Fresh asphalt stays soft longer in heat, so we ask you to keep cars off a new driveway until we say it is ready.

Ready to talk it through?

Tell us about the job. No obligation.

Request a quote
Request a quote