Asphalt Paving in Jacksonville, TX
Summit Asphalt paves driveways, lots and private roads in Jacksonville, about 25 miles south of Tyler. We know the town is different from a new subdivision, and we plan each job around that.
Below is what we see on Jacksonville properties, which jobs come up most, and what the city asks for before a driveway goes in.
What's different about asphalt paving in Jacksonville
Three things shape most of our Jacksonville work: older homes, soil that moves, and the drive from Tyler.
Older homes, older driveways
About half the homes in Jacksonville were built before 1980. That means many driveways have been patched, widened or overlaid more than once, and the base underneath may be thin or uneven. We look at what is under the surface before we decide whether a repair, an overlay or a full rebuild makes sense.
Soil that swells and shrinks
Soils around central Jacksonville have a moderate shrink-swell tendency. They expand when wet and shrink as they dry out. Asphalt is flexible, which helps, but a driveway still needs a well-compacted stone base and good drainage so water doesn't sit along the edges and soften the ground.
Weather we plan around
The Tyler area gets about 42 inches of rain a year, so we shape every surface to shed water. It also sees roughly 98 days a year at 90°F or hotter, and fresh asphalt is softer in that heat. We schedule around it and keep heavy loads off new pavement until it has cured.
Common asphalt paving jobs in Jacksonville
Most of our calls here fall into a few groups:
- New or replacement driveway paving for homes, including driveway paving Jacksonville homeowners need after old pavement has failed
- Asphalt repair for cracks, potholes and sunken spots
- Resurfacing where the base is sound but the surface is worn out
- Parking lot paving and striping for small businesses and churches
- Sealcoating to slow aging on pavement in good shape
About 61% of occupied homes in Jacksonville are owner-occupied. Most of our residential customers are living with the driveway they are fixing and want a clear plan before work starts.
Driveway permits in Jacksonville
The City of Jacksonville requires a driveway permit for all new and reconstructed residential driveways. Commercial driveways need one too. A permit is also required to install, rebuild or remove a driveway connection to a city or state highway, and to keep or change an existing driveway when vacant land is developed, new structures go up or land use changes.
Check with the city for current details before you start. If you aren't sure whether your job needs a permit, ask us when you request a quote.
How we work with Jacksonville homeowners
We start with a look at the existing pavement, the drainage and the base. Then we explain what the job needs and why, in plain terms.
For a new or rebuilt driveway, we prepare and compact the base, set the slope so water runs away from the house, then lay and roll the asphalt. For smaller problems we tell you if a repair will do the job, so you don't pay for more than you need.
Questions from Jacksonville
Do I need a permit to repave my driveway in Jacksonville?
New and reconstructed residential driveways need a city permit. Whether a simple resurfacing does is a question for the city, so we recommend asking before work begins.
Ready to talk it through?
Tell us about the job. No obligation.