Parking Lot Paving in Tyler, TX
A parking lot is the first thing customers, tenants and visitors touch at your property. Cracked, ponding or crumbling pavement says something about the business before anyone walks in the door. It also creates trip hazards and wears down tires.
Summit Asphalt handles commercial paving for lots of all sizes in Tyler: new construction, full replacement, and resurfacing over a sound base. Here is how we decide what a lot needs, how we build it, and what to expect along the way.
When do you need parking lot paving, and when don't you?
Not every tired lot needs to be torn out. If the base underneath is solid and the damage is on the surface, a smaller fix often does the job. Our crews look at the whole lot before recommending anything.
- Patching or crack sealing: a few isolated problem spots with a firm base around them. See asphalt repair and patching.
- Sealcoating: the surface is still in good shape but looks faded and is starting to oxidize. See sealcoating.
- Resurfacing: widespread surface cracking and wear, but the base is still sound. See resurfacing and overlays.
- Full paving or reconstruction: the base has failed, water is getting under the pavement, or the lot is new or being expanded.
If we think a cheaper fix will serve you better than a full repave, we will tell you that.
Signs your parking lot is due
Walk the lot after a rain and look closely. These are the problems that tell us the pavement is past surface repair:
- Alligator cracking, a web of interlocking cracks that means the base is flexing under traffic
- Potholes that keep coming back after patching
- Standing water that stays for hours after the rain stops
- Sunken areas around drains or utility covers
- Edges breaking away, or loose stone and rough texture across large areas
- Faded or missing markings that can't be restored because the surface underneath is crumbling
How Tyler's weather and soil affect your lot
East Texas pavement fights water first. The Tyler area gets about 42 inches of rain a year, so a lot has to shed water fast. Water that sits on asphalt or soaks through cracks softens the base, and that is where most failures start. We grade lots so water runs to drains and edges instead of pooling.
Heat matters too. Tyler sees about 98 days a year at or above 90°F, and hot asphalt softens under parked cars and turning delivery trucks. The mix and thickness we choose depend on how heavy and how frequent your traffic is.
Freezing is less of a problem here than farther north, with about 29 nights a year at or below freezing. Even so, water that gets into a crack and freezes will widen it, so sealing cracks early still pays off.
The soils around central Tyler have a low shrink-swell potential. They do still expand when wet and shrink as they dry, just less than the heavy clays found in many parts of Texas. That is good news for pavement, but it doesn't replace a properly compacted base and good drainage.
Our parking lot paving process
Every lot is different, but the work follows the same basic order.
1. Walk the site and assess
We look at the pavement condition, drainage, traffic patterns and any areas where trucks turn or park. We note where water collects and where the base looks weak. From that we recommend repair, resurfacing or full replacement.
2. Prepare the base
For a full paving job, we remove failed asphalt as needed, fix soft spots, and grade the subgrade so water drains correctly. Then we compact the stone base. A paved surface is only as good as what sits under it, so this step gets the most attention.
3. Lay and compact the asphalt
We place hot-mix asphalt at the right thickness for your traffic and roll it while it is still workable so it compacts tight and smooth. We take care at drains, curbs and edges, where most water problems begin.
4. Stripe and finish
Once the pavement has cured enough, we mark stalls, fire lanes, arrows and accessible spaces. We handle this through our parking lot striping service, so the lot is ready to use when the job ends.
What affects the cost of parking lot paving
We don't quote by guesswork, and we don't give numbers before we have seen the lot. These are the things that move the cost most:
- Size of the lot: more square footage means more material and more crew time
- Condition of the base: a failed base needs to be rebuilt, not just covered
- Asphalt thickness: lots with heavy truck traffic need a thicker build than a lot used mostly by cars
- Drainage work: regrading, new inlets or edge changes add to the scope
- Access and phasing: working around open hours and tenants takes planning
- Striping and details: the number of stalls, accessible spaces, curbs and signage
A written scope after a site visit lets you compare options side by side.
Questions about parking lot paving
These are the questions property owners and managers ask most often. More answers are on our FAQ page.
Can the business stay open during paving?
Often, yes. We plan the work in sections where the layout allows, so some parking stays available. Tell us your busiest days and hours, and we will build the schedule around them.
How soon can we drive on new asphalt?
Fresh asphalt has to cool and firm up first. How long that takes depends on thickness, sunshine and air temperature. We will tell you when each section is ready and where to keep heavy vehicles off.
Can you resurface instead of replacing the whole lot?
If the base is sound, an overlay can save time and material. We check for base failure first, because paving over a weak base only hides the problem for a short time.
Do you work outside Tyler?
Yes. We also pave in nearby towns, including Hawkins, Jacksonville and Chandler. For general work around the area, see our asphalt paving overview.
Ready to talk it through?
Tell us about the job. No obligation.